Toolsaver Issue 2025

Power-TEC - For those finishing touches

91455

Overspray and Fallout Clay Dark and Metallic 91455

Tungsten Denibbing Tool 92665

Light and Straight 91454

For the removal of overspray and other contaminates such as industrial fallout, jet fuel residue, tar and other general airborne pollution from paintwork in preparation for polishing or waxing.

CODE PRICE 91455 £24.95 91454 £24.95

The Power-TEC Denibbing Tool is a fast and effective way to remove paint and clear coat imperfections, without the need for respraying.

91454

£42. 95

Overspray & Fine Detailing Clay Sheet 92747

£24. 95

The Power-TEC 92747 is a new way to detail and clean paint work prior to final polishing. Simple and faster to use than a clay bar. Í Sheet size: 120 x 80 x 2mm thick.

Shim-Masks 3pc 92439 Used by professional painters and varnishers, SMART and spot repairers, and vehicle refinishers.

Run Razor 91433

This unique tool is used to eliminate runs and sags in fresh paintwork. Normal methods will result in the repair area becoming enlarged causing extra re-work. Í Simply dial the blade until it touches the run & gently pass over the surface.

Protects surrounding paint while runs or imperfections are removed with either a razor blade or sanding block. Í Chemical etching of shapes

£6. 95

£19. 95

means no burring of edges giving a perfectly flat finish.

Stripe Off Discs & Eraser Pads Ideal for the quick removal of pinstriping, decals, stickers, adhesive tape, and residue from car bodywork without damaging the surface. Also suitable to use on glass, metal and wood.

Nib File – Coarse 91449 Í Removes sags & runs on primer or top coat. Í Use in one direction and use on dry paint only. Nib File – Fine 91450 This ingenious tool fixes paint imperfections without the need for re-spraying. Í Easily removes dirt & paint runs from finished paint surfaces. Í Fine pattern removes tiny imperfections. Í Precision ground file gives uniform results.

Stripe Off Disc 2pc 92623 Í Size: 88mm diameter x 15mm deep. Í Shank: 5/16 " x 24T shank; includes adaptor for drill use. Í Max 4000 rpm. Stripe Off Eraser Pad Set with Drill Adaptor – Cone Shaped 9276 Í Sizes: 70 x 60 x 25mm long. 50 x 35 x 45mm long. Í Maximum speed: 4000rpm.

Stripe Off Disc – 5/16" x 24 Thread Shank 92448 Í Rubber erasure wheel, 90 x 15mm. Í With 5/16” x 24tpi thread shank. Í Max 4000 rpm. Fluted Stripe Off Disc 92554 Í Special heat dissipating pattern, helps to prevent overheating & smearing. Í Size: 90mm x 20mm. Í Supplied with an adaptor for drill use. Max 4000rpm. Fluted Stripe Off Disc with Adaptor 92429 Í Fluted design helps to prevent overheating & smearing. Í Size: 100mm x 25mm. Í Max 4000rpm.

£22. 95

£15. 95

£6. 95

£6. 95

£11. 95

£9. 95

Razor Scrapers 5pc 92586 A pack of 5 razor scrapers, for removing

Stripe Off Disc with Shank 91488 Í With 6mm shank. 90mm x 15mm Í Max 4000 rpm.

dried on paint and adhesives. Part of the bodyshop range

of consumables. Í Plastic Body. Í Non retractable.

£4. 95

£5. 95

£2. 95

12 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY