Toolsaver Issue 2025

AirTools WIND

£399. 95

Air Impact Wrench 3/4 " D with 6 " Anvil 9208

Extended anvil (output shaft) for recessed wheel nut access and user convenience, much lighter in weight than other industry models. Ideal solution in HGV wheel replacement, vehicle repair, fleet maintenance, heavy plant, construction and agriculture. Í 3/4” drive producing 2170Nm maximum torque. Í Working torque: 1763Nm (1,300 ft-lb) at 5 seconds. Loosening torque: 3526Nm (2,600 ft-lb) at 25 seconds.

£349. 95

Bi-Directional Pneumatic Air/Slide Hammer 9210 Uses standard workshop air to extract (pull) or insert (push) by automatically forcing the hammer weight in one

£119. 95

Reciprocating Air Saw 8788 Gear driven with patented

direction or the other. Uses air hammer technology around a central shaft. Í Significantly reduces shock to the user’s hands and arms over time associated from the impact of standard slide hammers. Í Main tool thread M18 x 2.0mm. Also supplied with 2x thread adaptors

reciprocating crank mechanism designed for consistent cutting applications and reduced stalling. Í Built in Dual-Speed design lengthens blade lifespan, with the high speed mode allowing the tool to cut faster.

(M14 x 1.5mm & 5/8 " UNF) & air chisel adaptor. Í BPM: Pulling: 1,300, equal to 4,000kg of force; Hammer: 1,300, equal to 4,000kg of force.

5-in-1 Air Tool Kit 9010

A unique set that uses just one air motor to power 5 different “heads”. The innovative but secure quick release system allows the heads to be changed in seconds to do 5 completely different tasks. Heads include: Í 1/2" drive ratchet head. Í Angle grinder head. Í Inline die grinder head. Í Angled dies grinder head. Í Air drill head.

£329. 95

£69. 95

£199. 95

Go Thru Air Ratchet Socket & Bit Set 9016

Long Reach Air Cut Off Tool - 75mm 9077

An innovative unique Go Thru style air ratchet, Go Thru sockets and square drive adaptors that allow standard sockets and 1/4” shank screwdriver bits to be used on one tool. Go Thru socket provides reduced access height over a standard wrench/ socket assembly. Í Drive convertors included: 1/4”D, 3/8”D & 1/2”D (for use with standard socketry), magnetic 1/4” shank bit driver adaptor. Í 10x Go Thru sockets, single hex: 8 - 21mm; 1 0x 1/4” shank bits: PzDrive: Pz1, Pz2 Pz3; Flat: 4.5, 7mm; Hex: 4, 6mm; Star*: T25, T30, T40.

A pneumatic cut off tool with extended handle for hard to reach and confined areas on a vehicle, suitable for cutting exhausts, holding brackets, axle “U” bolts and door sills. It features a protective head guard, moveable through 360°, with a safety trigger to prevent accidental use. Í For use with 75mmØ (3”) cutting discs, with protective safety guard. Í Air inlet: 1/4 " BSP.

22 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY