Toolsaver Issue 2025

Air Impact Wrench 3/4”D with 6” Anvil 9208

Composite body for lightness, strength and to help avoid heat loss from the hands normally experienced when working with powerful air tools. Extended anvil (output shaft) for recessed wheel nut access and user convenience, much lighter in weight than other industry models. Ideal solution in HGV wheel replacement, vehicle repair, fleet maintenance, heavy plant, construction and agriculture. Í 3/4” drive producing 2170Nm maximum torque.

£399. 95

Í Working torque: 1763Nm (1,300 ft lb) at 5 seconds. Loosening torque: 3526Nm (2,600 ft-lb) at 25 seconds.

HGV Oil Filter Wrenches

£19. 95

£24. 95

Oil Filter Chain Wrench 60 - 170mm 7858 1/2" drive heavy-duty, double chain wrench designed to fit a wide range of filter sizes. Í Excellent slip resistant grip on oily surfaces and slim enough to fit in awkward areas. Oil Filter Chain Wrench - for HGV 6318 Strong, double width chain wrench with handle designed for heavy duty applications, including HGV use. Í Fits filters from 60-160mm diameter. Chain length: 520mm. Oil Filter Strap Wrench – for Trucks and agricultural machinery 7860 Oil filter strap wrench for larger engine filters. Í For filters up to 150mm in diameter. Í 1/2" square drive for use with a power bar or ratchet. Í 50mm wide nylon webbing strap will not damage the oil filter.

Oil Filter Wrench - for DAF (LF) 7836 Oil filter wrench for DAF (LF) 92mm

x 10 flutes x 1/2" drive. Í Applications include: DAF(LF) 17 ton EURO 4/5. Í 27mm hex & 1/2" Drive.

Í Can be used with 27mm ring spanner or 1/2" drive ratchet, depending on access. Í Designed to fit Fleetguard LF16015 canister type filters with 10 flats.

Oil Filter Wrench 135mm x 18 Flutes 6608 1/2"D cup style oil filter wrench suitable for HGVs.

£9. 95

£39. 95

Í Applications: MAN 18-40 tonne to Series FE & TGA (406, 414, 440, 460) Í Size: 135mm x 18 flutes. Í 1/2"D, 21mm Hex. Can be used with

21mm ring spanner or 1/2" drive ratchet, depending on access.

Oil Filter Wrench 107mm x 15 Flutes 6607 1/2"D cup style oil filter wrench suitable for HGVs. Í Applications: Volvo, Iveco, Scania and Renault. Í Size: 107mm x 15 flutes. Í 1/2"D, 21mm Hex. Can be used with DPF Removal/ Installation Tool - Scania 8929 Designed to allow the easy removal and fitment of the DPF (Diesel Particulate Filter) found on SCANIA 5 and 6 Cylinder Engines. Í Designed to allow removal & installation of a DPF found on DC09 and DC13 engines. Í Applications include: Scania truck L, P, G, R & S (from 2016); P, G, R & T (2003 to 2018); Bus F, K & N (from 2004). Í Use in accordance with OEM instructions. 21mm ring spanner or 1/2" drive ratchet, depending on access.

£9. 95

£24. 95

£499. 95

26 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY