Toolsaver Issue 2025

PROMOTIONS VALID FROM 1st Oct – 31st Dec 2025

Lift capacity up top 500kg

Transmission Support Arm 8579 Simplifies and speeds up time of gearbox removal and fitting by supporting the gearbox from above by attaching to a traditional vertical gearbox jack with the support strap and chains supplied. Í Significantly improved stability requiring only one person and hands free operation. Í 200kg safe working load. Í Designed to fit vertical transmission jacks with 25mm & 30mm shafts.

£89. 95

Strut Support for Transmission Jacks 8351 Designed for use with a hydraulic vertical transmission jack or gearbox stand, to hold the strut in place whilst working insitu on the vehicle suspension, preventing it from moving downwards. Í Use with transmission jacks fitted with 30mm diameter top shaft.

Extends to 1940mm

MADE IN THE UK

Vertical Transmission Jack 500kg 8655 Hydraulic vertical transmission jack with a telescopic ram. Makes removing gearboxes and transfer cases etc from vehicles on 2 or 4 post ramps safer and easier.

Move the gearbox through all three axes of movement

Suitable for use with Laser 8655 Transmission Jack.

Í Features a foot pedal for hands-free operation. Í 4 steerable castors and side-mounted handles for easy manoeuvrability. Í Capacity: 500kg (1100lbs). Lifting range: 1130-1940mm Í Ram diameter: 30mm Weight: 30kgs. Í Use with 8579 transmission support & 8351 Strut Support.

£219.

95

£229. 95

Multi position adjustable lifting arm

Engine/Gearbox Support 5750 Designed for transverse engined vehicles, the

Engine Crane - 1 Tonne 8337

frame will support the engine and/or

£239. 95

gearbox when carrying out repair operations

Adjustable crane for raising loads up to 1 tonne (max capacity), with a multi-position lifting arm which features a swivel hook with full 360° rotation. Í Manufactured from rectangular section heavy -duty steel for added strength and fully welded hydraulic cylinder to reduce potential leakage. Í Dimensions: 1515 x 1050 x 1445mm; Weight: 67kg. Folds away for easy storage.

like clutch or gearbox removal, DMF change, removing and replacing engine and gearbox mounts, for cam belt replacement, etc. Í With car on ramp, engine/gearbox position and height can be adjusted from underneath. Í Frame length: 600mm - 930mm (fully extended). Maximum width of thrust pins: 300mm (position 1), 500mm (position 2). Maximum load 400kg.

£379. 95

29 ToolSaver

Hurry Exclusive, limited time offers on new & best selling tools & equipment!