Toolsaver Issue 2025

Braking

Pneumatic Brake Bleeder & Fluid Extractor 9168

Featuring a 2L vacuum bottle equipped with a hard nylon probe to allow access to tight spaces for fluid extraction using workshop air. Perfect for difficult to get to master cylinder reservoirs and low viscosity oils found in power steering pumps etc. Í Supplied with a brake bleed adaptor to allow use for vacuum bleeding from the callipers/slave cylinders etc. Í With 4mm (I/D) by 1000mm long silicon hose & 4mm (I/D) x 600mm long rigid Nylon pipe.

£49. 95

£59. 95

German Vehicle Brake Caliper Set 8237 Impact quality socket and bit set specifically designed for use on brake calipers fitted to a range of German vehicles, including Volkswagen, Audi, Porsche, BMW, Ford and Mercedes-Benz.

Brake Master Cylinder Cap Kit 7101 Brake master cylinder cap kit suitable for most brake pressure brake bleeders. Í 2 x Universal cap assembly for diameters: 47 - 85.5mm & 29 - 55mm with hooks chain & bracket. Í 8 x Caps: Nissan bayonet 34.5 - 53.5mm, Euro cap 42 - 57.5mm, Chrysler, Jeep 3 point bayonet 43.5 - 49mm Cap & blank, GM 49.5 - 66.5mm, Hyundai, Mitsubishi, Subaru, Ford & Chrysler 50.7 - 57mm, Honda 56 - 79.5mm, Honda 74 - 93mm. Í 1 x 41mm adaptor with lock clamp for Toyota or Lexus.

£199. 95

Brake Caliper Hydraulic Spreader 8092 For 2, 4 and 6 piston

£49. 95

Digital Brake Disc Caliper 9129 A digital vernier gauge with a data hold function, suitable for measuring brake disc thickness. Í Measures in metric & imperial. Range: 0-60mm (0-2.3622").

calipers, supplied with three sizes of spreader pad. Í Spread range: 37 - 71mm.

£69. 95

£24. 95

Mini Ratcheting Brake Pipe Cutter 4.75mm 7624 Automatic self adjusting brake pipe cutter with ratchet handle. Í Automatic self-adjusting for faster cutting.

Pneumatic Brake Caliper Rewind Tool Kit 3991 Í Pneumatic rewind tool for use with an air gun. Í Fixed 2 pin drive or 3/8"D. Í Pneumatic rewind tool for left and right hand threaded pistons.

For left and right handed threaded pistons.

£139. 95

Brake Pipe Bender & Clamp Set 8568

£29. 95

£7. 95

Compact pipe bender designed to enable the new pipe to be clamped to the existing pipe even while still attached to the car, so that the replacement can be shaped to replicate the one that it’s replacing. Í Features a T-bar handle & triple roller design for accurate, controlled pipe forming. Can be used hand-held, or mounted in a vice.

Hose Clamp Set 2pc 7254

Made up of a pair of small hose clamps, this clamp kit is ideal for use on flexible non-braided brake hoses, fuel hoses, oil lines & vacuum hoses. Ideal for use on motorcycles, cars and trucks. Í Adjustable - Maximum hose outside diameter 15mm.

36 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY