Toolsaver Issue 2025

Diesel

Diesel Injector Repair

£199. 95

8727

6263

4811

Difficult Access Diesel Injector Pipe Sockets 17/18mm 3/8"D 2pc 9198

£18. 95

Diesel Injector Adaptor - for Ford EcoBlue 2.0 Diesel 9092

Bi-hex injector pipe gland nut sockets with outer dimensions that have been significantly reduced to ensure you can easily make full contact with the 17mm and 18mm pipe nuts found used on Piezo style injectors with top mounted pipes. Í Applications include: Volkswagen Group, Mercedes-Benz & BMW ranges. Í Length: 63mm. Slot width: 8mm (approx.).

Clamps around the whole injector without the need to break or disassemble and allows the user to remove the diesel injectors from the Ford ECO-Blue 2.0L engines, using Laser Part Nos. 6263, 6092, 8727 or any slide hammer equipped with a 5/8" UNF thread. Diesel Injector Extractor with Air Hammer & Adaptors 6263 Diesel injector extractor and air hammer set, supplied with accessories and injector adaptors for removing most diesel injectors. Í Professional air hammer with variable speed trigger, built in power regulator and quick change chuck. Delivers 2200 blows per minute (bpm)/ stroke length 98mm. Í Includes 7 diesel injector adaptors: Siemens (2), Denso, High Pressure M12, Delphi, M16 Denso and Bosch Dual Connector. Plus valve seal removal tool for Denso, off-line injector adaptor for access and a Bosch injector dismantling tool.

Í Applications include: Ford Edge, Focus, Galaxy, S-Max (from 2018); Kuga, Mondeo, Ranger (from 2019); Tourneo & Transit (from 2016).

REGISTERED D E S I G N UK

£59. 95

Diesel Injector Puller Kit - Iveco & FUSO 3.0L 9216

A simple to assemble and use diesel injector extractor for the Iveco Daily and Fiat Ducato 3.0L diesel engines. Í Applications include: Euro 5, Iveco Daily III, IV, V, VI (from 2002), Fiat Ducato, Peugeot Boxer (from 2006) & FUSO.

£349. 95

£169. 95

£49. 95

Diesel Injector Seal Puller 5450

Used to remove copper washers for sealing diesel injectors where they enter the cylinder head. Í Tip diameter: 4.5mm (min) to 13.2mm (max).

Diesel Injector Seat Cutter Master Kit 8667 A set of 14 diesel injector seat cutters and one injector base cleaner designed to ensure that the injector bore area is clean and faced to the dimensions required when replacing or reconditioning the diesel injectors, avoiding blow back and poor emissions. Supplied with a T-bar driver with 19mm hex socket.

MADE IN THE UK

£29. 95

£39. 95

Diesel Injector Copper Washer Remover/Installer 4702 Remove and install copper washers on deep seated diesel injectors quickly and effectively with this special tool. Í Reach: 230mm.

£14. 95

Diesel Injector Bore & Sleeve Cleaning Kit 3pc 8442

TOP UP PACKS

Assorted Common Rail Diesel Injectors Washers 150pc 34999 Í Assortment of sizes from 13.8mm to 15.0mm. AVAILABLE

Stainless steel cleaning brushes for removing carbon deposits and debris from the fuel injector ports, bores, sleeves and seats prior to refitting the fuel injectors.

38 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY