Toolsaver Issue 2025

Suspension Repair

£19. 95

Ball Joint Wrench Set - for Mercedes-Benz 8459

Offset ball joint wrenches designed for the removal and installation of both the upper and lower ball joint nuts on Mercedes models fitted with double wishbone suspension set ups. From 2015 onwards. Í Applications: C class (2015 to 2021), E class (2015 to 2021), GL (2016 to 2021) and AMG GT (2019 to 2021).

Ideal for loosening stuck wheels, no need to resort to wooden blocks & hammers.

£339. 95

£12. 95

Suspension Play Tester 9174

Ball Joint Socket 1/2"D - for Renault 8098 Allows removal of the screw in type lower joint from the bottom arm. Application: Renault Twingo II Sport 133 (2007 - 2014).

Designed to easily and quickly attach to a vehicle wheel, allowing the user to simply move the wheel up and down or left to right to feel and look for play in the suspension & steering system. Ideal for detecting movement in worn joints, wheel bearings and top strut mounts. Designed for use with the vehicle on the floor or ramp. Í Fits tyre diameters from 550 - 800mm. Í Mounts horizontally to check steering joints & tie rods. Í Can be used on front & rear wheels.

Air Suspension Strut Leak Tester Kit 8976

Designed for testing air suspension struts for leaks. Allows the strut or any pneumatic system to be pressurised from workshop air and then isolated using the built-in tap. Any pressure drop can then be monitored over time. Í BMW, Mercedes-Benz, Audi, Porsche Cayenne, Land Rover vehicles fitted with air suspension struts. Í Adaptors included in kit: 1/8 " NPT, M8 x 1.0mm, M9 x 1.0mm, M10 x 1.0mm. Í Can be used on-vehicle depending on access.

£69. 95

£17. 95

FROM

£17. 95

Suspension Split Hub Knuckle Spreader Bit Set - Oval Shape 3pc 9263 A set of 3 compact hub clamp spreader sockets designed to allow the suspension split hub to be held open to make the removal and fitting of the suspension strut easier. Suitable for use on various BMW, Citroen, Ford, Peugeot and VW Group models. Specially shaped oval bits give a smoother more progressive action. Í Simple to use. Slide the oval shaped

Track Rod Adjusting Wrench Track rod adjusting wrench suitable for adjusting track rods, as well as for general use. Í Pipe wrench type design with quick fit spring loaded jaw. Í Serrated jaws help prevent slippage & damage to track rods. CODE SIZE JAW RANGE PRICE 8828 690mm 10mm - 42mm £21.95 8038 457mm 10mm - 35mm £17.95

Spring loaded drop-forged jaw for strength

bit into the hub slot & turn through 90 degrees to open the joint. For use with a 1/2" drive wrench.

6 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY