AG publications ASAP supplies equipment catalogue

LOPRO BILGE PUMP (AUTOMATIC) The LP900S submersible bilge pump features a fully rotating discharge body for installation flexibility, allowing horizontal or vertical mounting. This bilge pump also features the following 3 operation modes: High water mode: The pump starts when the water level reaches 50mm (2”) Low water mode: Turn the motor cartridge 180° and the sensor is at 33mm (1.3”) Full Electronic mode: The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone.

504166

Part no.

Model

Volts

Amp draw

Flow rate at 0 head lpm

Outlet mm (inch)

Dimensions mm (l x w x h)

PUMPS

504166

LP900S

12V

4A

56

19 (3/4”), 25 (1”), 28 (1-1/8”)

237 x 38 x 59

ORCA 1300 AUTO ELECTRIC BILGE PUMPS Part of the Whale IC range of intelligently controlled pumps. The 1300 has a capacity of 1300 US gallons per hour! These pumps requires no additional float switch or sensor, as they are integrated within the pump to ensure the most effective automatic bilge water removal. • Simple installation • CE Certified and meets ISO8849 marine specifications • Robust fuel resistant ABS housing (which is easily released with two push buttons to allow easy access to the motor cartridge and filter area)

Part no.

Model

Volts

Amp draw

Flow rate lpm Outlet size mm (inch)

Height mm

Width mm

Depth mm

504252

504252 504254

BE1482 12V

5A

82

25 (1”) or 28.5 (1-1/8”) 25 (1”) or 28.5 (1-1/8”)

129 129

168 168

121 121

BE1484 24V 2.5A 82

SUPERSUB SMART BILGE PUMPS (AUTOMATIC) The award winning Whale SuperSub automatic submersible bilge pumps eliminate the need for a separate float switch to activate the pump. Once power is supplied to the bilge pump, starting and stopping is completely automatic. • Narrow low profile design, ideal for confined spaces • Can be fitted into compartments where height restriction is an issue • Easy and simple to install • Easy to clean and leaves the bilge almost dry • Integrated solid state switch ensures power consumption is minimised and that there are no moving parts • Suitable for leisure craft (If used as a sole or primary bilge pump it is only suitable for vessels up to 24 metres) • Comes complete with a non-return valve • Conforms to ISO 8849 and ISO 15083 standards • Ignition protected per ABYC and USCG standards • CE certified directive 89/336/EEC - EMC compliant

504232

Part no.

Model

Volts

Amp draw

Flow rate lph (US gph)

Pump hose size mm (inch)

Height mm

Width mm

Depth mm

Non return valve

504237 504232 504234

650

12V 3.4A 2,460 (650)

19 (3/4”)

54 54 54

212 240 240

75 75 75

No Yes Yes

1100 12V 4.3A 3,960 (1,046) 1100 24V 2.2A 3,960 (1,046)

25-28 (1”-1-1/8”) 25-28 (1”-1-1/8”)

504237

PRE-WIRED REMOTE MOUNTED BILGE PUMP (AUTOMATIC) The Whale Gulper IC is a remote mounted electric bilge pump with intelligent control electronics built in. These pumps reduce the need for four separate components and removes the hassle when installing and maintaining the unit. At the heart of every Whale IC product lays innovative electronic control circuitry. This enables IC sensor accessories to communicate directly with IC pumps to control their performance and to switch on and off automatically. • Easy inspection and protected by mounting up to 4 metres away from the bilge area • An integrated non-choke valve means no filter to maintain and clean • Easy to install even on uneven surfaces • Secure fit with new wrap around mounting feature • Self-primes and runs dry • Three products in one: Strainer, non-return valve and electronic control switch • Fits in confined bilge spaces • Fit and forget, requires no maintenance • Replacement pump head kit and diaphragm - 504839

504837

Part no.

Model

Volts

Amp draw

Flow rate lph (US gph)

Pump hose size mm (inch)

Strainer hose size mm (inch)

Length mm

Width mm

Depth mm

504837 504838

SI8224B 12V 8A SI8424B 24V 4A

1,140 (301) 1,140 (301)

19-25 (3/4”-1”) 19-25 (3/4”-1”)

19 (3/4”) 19 (3/4”)

280 280

198 198

120 120

225

info@asap-supplies.com

www.asap-supplies.com

01502 716993