AG publications ASAP supplies equipment catalogue

FLEXIBLE IMPELLER DRILL PUMP The Jabsco drill pump can be used almost anywhere an electric drill with 1/4” to 3/8” chuck can be operated. Part no. Model Output lpm Ports mm (inch) I.D. garden hose thread female Shaft mm (inch) 306592 17250-0003 13 13 (1/2”) 3/4” GHT 6.5 (1/4”)

Warning - pumps with AC motors can spark, do not use where flammable vapours are present.

306592

PUMPS

MANUAL HAND PUMP JAB-34060-0010

The Jabsco “Little Pal” compact hand pump is made from a corrosion resistant brass body, long life brass cylinder and high quality oil-resistant rubber plunger. This hand pump is suitable for bilge pumping, oil draining, diesel fuel transfer and other liquid pumping applications. These pumps never need priming and provide full suction from the first stroke. The pumps may be used in any position. More information available online at www.asap-supplies.com Pumps used in diesel fuel applications must be flushed clean after use to prevent neoprene distortion. Oil temperature should not exceed 60°C.

JAB-34060-0010

MARINE ENGINE COOLING PUMPS

A raw water pump is an essential part of any engine cooling system. On a heat exchanger cooled engine, the flexible impeller pump provides external water (sea water or river water) to the heat exchangers to cool the engine. The raw water flexible impeller cooling pump can be pulley driven, foot mounted, gear driven, flange mounted or crankshaft mounted. The engine coolant is distributed by the engine’s integral circulating pump. For keel cooled engines, the internal engine circulation pump pumps the water to the keel coolers or skin tank. A flexible impeller pump is not generally used unless the engine has a wet exhaust system in which case a small flexible impeller pump may be used to cool the wet exhaust tube and components. We supply flexible impeller pumps from the market leaders Jabsco, Sherwood and Johnson.

PULLEY DRIVEN ENGINE COOLING PUMPS

Part no.

Description

Port size BSP female Shaft size mm

Spare impeller JAB-1210-0001-P JAB-1210-0001-P JAB-1210-0001-P JAB-17937-0001-P JAB-17935-0001

JAB-CW403

JAB-52040-2001

JAB-CW403 JAB-CW404

Pedestal mount, with pulley 3/4” Pedestal mount, with pulley 3/4”

127 Pulley 159 Pulley

JAB-52040-2001 JAB-52080-2001 JAB-52200-2011

Pedestal mount, bare shaft Pedestal mount, bare shaft Pedestal mount, bare shaft

3/4”

17 16 25

1”

1-1/2”

JAB-52080-2001

JAB-52200-2011

JAB-52042-0200 Jabsco pump pulley suitable for use with Jabsco 52040-2001 engine cooling pumps. This pulley has a diameter of 127mm (5”) and is suitable for a 17mm shaft.

JAB-52042-0200

PULLEY DRIVEN ENGINE COOLING PUMPS

Part no.

For engine

Description

Port size

Spare impeller

SWG907P

SW09000K

Kohler Ford & 4KW to 6.5KW Engines

Pedestal mount, with pulley 3/8” NPT female

SWG910P

SWG8002

SWG907P

SWG910P SWG8002 SWR30G SWK75B

SW09000K SW08000K SW10077K SW09959K SW09959K SW09959K SW10615K

Kohler Ford

Pedestal mount, with pulley 3/8” NPT female Pedestal mount, with pulley 3/8” NPT female

Onan 6MDKBJ & MDKBJ Various - please contact us Onan MDL3 (up to 15kW) and Onan MDL4 (up to 20kW)

Pedestal mount, bare shaft Pedestal mount, bare shaft

1/2” NPT female 1” O.D. hose tail

SWH5

SWR30G

SWK75B

SWH5 SWG21 SWG7B

Perkins 4.15

Pedestal mount, bare shaft

1” O.D. hose tail

Pleasurecraft 302 + 351 Chrysler Marine 318, 360, LM318-X & LM340-X

Pedestal mount, with pulley 1” O.D. hose tail Pedestal mount, with pulley 1-1/4” NPT female

SWG7B

SWG9903

SWG21

SWG9903 SWL10B SWG151

OMC & Volvo Penta 4 Cylinder Pedestal mount, with pulley 1-1/4” inlet, 1” outlet SW09959K

SW10615K SW15000K

Onan MDL6 5 Cylinder

Pedestal mount, bare shaft

1-1/4” NPT female

Starpower Inboard Engines & Mercruiser 7.3L

Pedestal mount, with pulley 1-1/2” NPT female

SWL10B

SWG151

245

info@asap-supplies.com

www.asap-supplies.com

01502 716993