AG publications ASAP supplies equipment catalogue

SLIMLINE WATER AND DIESEL PUMPS

These inline pumps are suitable for pumping hot and cold fresh water, seawater and hazardous liquids like antifreeze and diesel. This makes them ideal for use as a bilge pump, shower pump, washdown pump, refuelling pump, engine winterising pump or a simple water or diesel transfer pump. As such versatile pumps, they aren’t just suitable for boats - they can be used for washing cars and other vehicles, filling and emptying containers, draining sinks or even watering gardens. They are rated for continuous use but should not run dry for long periods of time. The body is made from acetal and is submersible. Designed to be portable and contains a 4 metre cable with crocodile clips on the end to connect to a power source. Because they are compact and portable, these are a very useful pump to have on board. • Cable length: 4 metres (13ft) • Operating temperature: Up to 80°C (176°F) • Approximate motor life: 150 hours

306555

Part no.

Model

Volts

Amp draw

Output lpm

Outlets mm I.D. hose

Length mm

Diameter mm

Head metres

Pressure PSI (bar)

PUMPS

306555 306557

IL280P

12V 4.5A 18

13 (1/2”) 13 (1/2”)

165 165

38 38

9.7 9.7

14 (0.96) 14 (0.96)

IL280P-24 24V 2.5A 18

• Manual semi rotary pumps for liquids free from suspended solids up to 80°C • Suitable for water, diesel, paraffin, oil etc. • Cast iron body construction with bronze internals • Supplied with wooden handle for manual operation SEMI ROTARY PUMPS Part no. Model BSP

Flow rate lpm

506713 506714 506715 506716

K0 K1 K2 K3

1/2” 3/4”

11.5 17.3 22.5

1”

506716

1-1/4”

29

ELECTRIC OIL CHANGE PUMPS

The Jabsco oil change pump is designed to be installed near a vessel’s engine and permanently plumbed in to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine.

Part no. 203812 203824

Model

Volts

Amps

Inlet size

Flow rate lpm

17830-0012 17830-0024

12V 24V

10A

3/8” NPT Female 3/8” NPT Female

24 24

5A

203812

MANUAL OIL CHANGE SUMP PUMPS

These manual brass oil change sump pumps are designed to be connected to the sump of a marine engine, in a more accessible and convenient location, to make oil changes easier at service time. These pumps are extremely popular for changing the engine or gearbox oil.

Part no. Thread

Overall height mm (with handle retracted / extended)

Cylinder height mm

Cylinder diameter mm

Pump capacity per stroke

Construction

BSP Male

203800 203801

3/8” 3/8”

240 / 285 220 / 270

172 165

30 30

77cc 77cc

Brass

Passivated steel

203800

203801

FLEXIBLE IMPELLER DRILL PUMP • This is a handy small pump which can be used anywhere an electric drill can be operated • Suitable for oil change, winterising, automatic transmission fluids, anti-freeze solutions, low viscosity gear and liquid transfer applications • Complete with a 30” length of garden hose and a length of 1/4” ID oil change tubing • Construction: 30% glass filled polyester • Impeller: BUNA-N Flexible reversible impeller

509592

Part no.

Model

Output lpm

Ports male garden hose fittings

Length mm

Width mm

Height mm

Shaft mm

509592

3010-000 13.6

3/4” GHT

66

112

71

6

244

info@asap-supplies.com

www.asap-supplies.com

01502 716993