AG publications ASAP supplies equipment catalogue

A typical steering system for outboard motors consists of a steering pump with integrated non-return and pressure relief valves, plus a steering cylinder and connection hoses. The steering pumps are also provided with a continuous air bleeding point. The pump and the cylinder are connected with nylon hydraulic hose. For larger rams and more outboard systems, please visit www.asap-supplies.com. HYDRAULIC STEERING FOR OUTBOARDS Technical data: Max. op pressure: 70 bar Connections: G 1/4- Dia 10mm V-HTP2010R Helm V-HTP3010R Helm

STEERING & CONTROLS

Capacity: 19.7cm 3 / rev Number of pistons: 5 Weight: 4.1kg Wheel turns Port - Starboard 5.5

Capacity: 30.0cm 3 / rev Number of pistons: 5 Weight: 4.1kg Wheel turns Port - Starboard 3.6

Nylon hose: Dia 8 x 12mm Pump fitting: Front mounting V-OBC125 - Steering ram Max. rudder torque: 643Nm Volume: 108.3cm 3 Max. output: 90kW (125HP) Max. speed: 85km/h (45 knots)

V-OBC125

STAINLESS STEEL FLANGE ADAPTOR

HEADER TANK V-HTANK

• •

For use with the Vetus HTP helm pumps Constructed from stainless steel

This transparent tank can be installed with all steering helm pumps up to 89cm³ per revolution. It is also recommended for electro-hydraulic hatch lifters, when operating more than one cylinder. It has a capacity of about 200cm³ and is supplied with a large vented screw cap, for easy filling and a mounting bracket. The tank comes complete with 1 metre of 8mm diameter hose, two matching hose clips, one G 1/4” and one G 3/8” nylon hose pillar.

• Supplied with a set of 4 stainless steel nuts, washers and bolts

Part no. V-HTPF V-HTPF2

Recess depth size mm

38 78

V-HTANK

V-HTPF

HYDRAULIC STEERING HOSE

The Seaflow SAE100 R7 black thermoplastic hydraulic steering hose is suitable for the delivery of hydraulic oils at high pressure. Sold per metre and cut to length. For Vetus steering hose, please visit www.asap-supplies.com. Part no. Bore (inch) O.D. Bend radius Working pressure Burst pressure 603508 8mm (5/16”) 14mm 50mm 190 bar / 2755 PSI 780 bar / 11312 psi

603508

NYLON HYDRAULIC STEERING HOSE Nylon steering hose suitable for use in a hydraulic steering system. This tube is recommended for runs of up to 30m (98’4”). Part no. 30 metre coil O.D. Working pressure Burst pressure 603589 603589-30 3/8” 41.3 bar / 600 PSI 124 bar / 1800 PSI

603589

FITTINGS

BYPASS VALVE

603511

603512

304608

Part no. 603511 603512 304608

Size mm

Type

V-BYPASS10

10 10 10

Straight

V-BYPASS10 • Supplied with compression fittings and olives for 10mm copper tubing cables • For systems using Vetus HHOSE6 series (6 x 10mm) nylon hose, order 4 x V-HS145S sleeve inserts (below)

90°

Tee piece

More fittings available, please see Fittings section, page 113.

TILLER ARMS

SLEEVES

These aluminium tiller arms are designed for connection to the rudder stock. The arm is attached to the shaft by two locking grub screws.

Part no.

For rudder shaft size mm

V-HS145S

V-HELM30 V-HELM40 V-HELM50

30 40 50

V-HS145S Vetus sleeve insert has a diameter of 6.5mm, suitable for use with HHOSE6 nylon hose. Set of 20.

V-HELM30

267

info@asap-supplies.com

www.asap-supplies.com

01502 716993