AG publications ASAP supplies equipment catalogue

FLANGEMOUNT BLOWERS

These blowers are suitable for flange mounting which installs directly onto the bulkhead.

Part no.

Model no.

Size mm (inches)

Volts Amp Draw

Recommended fuse size (amps)

Length mm

Height mm

Width mm

Flow rate m³ /min

716710 716711 716712 716714

34739-0010 76 (3”)

12 6.5 10

200

200 170 4.2

34739-0020 76 (3”) 35400-0000 76 (3”) 35400-0010 102 (4”)

24 3.3

5

200 220 220 240 240

200 170 4.2 230 220 7 230 220 7 230 220 7 230 220 7

12 12 15 24 5.3 7.5 12 11 15

716722* 35760-0092 102 (4”) 716724* 35760-0094 102 (4”)

24 6

10

*Heavy duty, designed for continuous duty

716710

VENTILATION

COWL VENTS Cowl air vents for deck mounting. These vents protrude above deck and are suitable for handling large volumes of air due to their shaped openings. V-SCIROCCO The Vetus SCIROCCO stainless steel shell ventilator is the ideal solution for ventilation openings to the engine room. Can be screwed directly on to the hull or superstructure. The vent comes with a plastic base plate, complete with water guard and hose connection. • Can be installed both horizontally or vertically • Hose connection: 76mm (3”) • Overall height: 100mm • Overall length: 132mm • Free flow area: 385mm² • Height above the mounting face: 50mm 813521 Perko cowl ventilator (model 1312) made from chrome plated zinc alloy with a black plastic base. The ducting hose connects to the neck without the need for hose clamps. • Hose connection: 76mm (3”) • Overall height: 67mm • Overall length: 146mm • Cowl opening: 203mm² • Width: 111mm COWL VENT

V-SCIROCCO

813521

DUCTING HOSE

• Flexible PVC coated glass fibre ducting hose with built-in steel spiral • Suitable for heating and ventilation systems • Brilliant resistance at both high and low temperatures • Vacuum: 2 bar • Very flexible making it ideal for use in bilges, engine compartments, galleys and head installations

716876

Per metre 10 metre coil

I.D. mm (inch)

O.D. mm

Temperature range °C

Stainless steel 316 hose clip to suit

Cable ties

716876

716876-10 716891-10

416214 416216

715013 715015

76 (3”) 100 (4”)

80

-20 to +70°C -10 to +70°C

-

105

716891-10

ONBOARD VENTILATION

WHY IS VENTILATION ON UNATTENDED BOATS SO IMPORTANT? Unattended boats make perfect moisture traps due to the different temperatures in and around the boat. When two different temperatures meet, moisture in the atmosphere can build up, especially on surfaces, and this moisture can quickly start to cause problems. Moisture makes an ideal breeding ground for bacteria, which then turns into mould - and mould doesn’t only look bad, it smells bad, damages your boat and makes the inside of your boat an unhealthy place to live. This is why when ventilating a boat you need to do more than just move the air around the main compartments, you need to try and keep all compartments, including the small areas you never see or think of, ventilated.

280

info@asap-supplies.com

www.asap-supplies.com

01502 716993