example

THROUGH HULL EXHAUST FITTINGS WITH FLAPPER VALVE • Made from glass reinforced plastic (GRP) in black or white finish • Fitted with a flapper to help prevent water entering the wrong way into the exhaust line when moving slowly or stopping • Allows exhaust fumes and cooling water out as normal • Features a slightly longer lip at the bottom to help steer water away from the transom of the boat, therefore avoiding ugly water marks • Flange comes with 4 bolt holes for mounting Black GRP White GRP Hose diameter mm (inch) Flange diameter mm External length mm Internal length mm Overall length mm Spare flap C 1200301 C 1200300 51 (2”) 89 44 70 114 C 1200344 C 1200299 C 1200298 76 (3”) 124 64 76 140 C 1200313 C 1200325 C 1200326 102 (4”) 152 83 114 197 C 1200340 C 1200343 C 1200342 127 (5”) 191 87 143 230 C 1200345

C 1200301

C 1200300

EXHAUST

EXHAUST OUTLET WITH FLAP Seaflow stainless steel exhaust outlet

• • •

Fitted with non-return rubber protector flap Made of mirror polished AISI 316 stainless steel

• Mounted with 4 x 6mm folding studs (studs not included)

Part no. 411100 411101 411102 411104 411106 411107 411108

Hose tail size mm (inch) Flange outside diameter mm Net opening mm Neck length mm

40 (1.57”) 45 (1.77”) 50 (1.96”) 60 (2.36”) 75 (2.95”) 90 (3.54”) 100 (3.93”)

75 75

35 40 45 55 67 73 90

75 75 80 80

100 100 131 131 182

411106

100 110 120

EXHAUST OUTLETS

RUBBER EXHAUST OUTLET

High quality stainless steel marine exhaust outlet with a high polished fixing flange. • Designed for mounting through the hull or transom of the boat • Suitable for use with wet marine exhaust systems • The 45° outlet is designed to help prevent water flowing into the system • Both feature an angled outlet so the water can be directed away from the boat therefore reducing the chances of water marks

411694

411694 •

Constructed from a tough black rubber Complete with a stainless steel trim ring

•

• Suitable for exhaust hose sizes from 60-70mm I.D. and 50-60mm O.D. • The use of the connector / support sleeve is recommended.

EXHAUST GUARD COVERS

Quietlife protecting end cover for through hull exhaust outlets • Made from tough rubber • Flap acts as a check valve to help prevent sea water entering the exhaust outlet and flowing towards the engine • Adjustable to two different sizes - The larger size shown is a standard size and the smaller size can be achieved by removing the marked section on the fixing ring • A stainless steel hose clip is also supplied, which can adjust to secure the exhaust flap whether it is at standard size or cut size

411650

411678

45° outlet

Straight outlet

Exhaust hose size mm (inch)

411670 411671 411672 411673

411650 411651 411652 411653 411654 411655 411656 411657 411658

40 (1.57”) 45 (1.77”)

409457

51 (2”)

57 (2.24”) 60 (2.36”) 63 (2.48”)

Part no.

To suit transom outlet size

-

Size mm (inch)

Cut size mm (inch)

411675 411676

409454 409455 409456 409457

51 (2”) 76 (3”) 102 (4”) 152 (6”)

40 (1.57”) 63 (2.5”) 89 (3.5”)

76 (3”)

-

89 (3.5”) 102 (4”)

411678

127 (5”)

108

info@asap-supplies.com

www.asap-supplies.com

01502 716993