example

BATTERY ISOLATORS AND SWITCHES

• Supplied complete with a removable red plastic key and a fitted splash proof cap for the key aperture

Part no.

Voltage

Current amps

Type / pole

Cylinder diameter mm

Overall length mm

714605

714605 714615 714621

12V / 24V 140A 12V / 24V 120A 12V / 24V 250A

On / Off single pole

25 25 25

116 142 135

Quarter turn key to isolate - dual pole

On / Off single pole

ELECTRICAL

714629 Replacement key for 714621

714621

714615

• Supplied with a removable key, spare key and a weather seal (replacement key 714601-1 )

Part no. 714601

Continuous capacity (amps) Contact studs

Base diameter mm Height mm (excluding cap)

100A

M10 terminal nuts / studs 57

64

714601

• Supplied with a removable key (replacement key 714601-1 )

Part no. 714608

Continuous capacity (amps) Contact studs

Base diameter mm Height mm

150A

M10 terminal nuts / studs 57

106

714608

• Allows simultaneous charging of multiple batteries without connecting them together • If you were to discharge one battery then it will not affect any other batteries • The voltage drop is less than 0.02 Volts at low current and only around 0.1 Volts at higher currents BATTERY ISOLATORS

Part no.

Amps 100A 100A 200A 200A

No. of batteries

Height mm

Width mm

Depth mm

VC ARG100201020 VC ARG100301020 VC ARG200201020 VC ARG200301020

2 3 2 3

65 65 65 65

120 120 120 120

200 200 200 200

VC ARG200301020

BATTERY SPLIT CHARGERS

The ASAP Electrical range of “very low drop” automatic battery sensed isolators (charge sharers, split chargers) allow you to recharge two or more batteries simultaneously. • Automatically separate connected batteries to prevent discharge or “dumping” of the battery with higher remaining power into the one with the lower power • Automatically charges the battery which has the lowest charge and then proceed to the other batteries • Heavy duty construction with a rust proof, anodised aluminium case • Wide cooling fins to provide the maximum protection from overheating thus extending the isolator life • “Very low drop” characteristic guarantees an extremely small loss of voltage at the exit • Maximum voltage: 200V

Part no. 741002 741003 741004 741006 741032 741033 741042

Amps

Number of battery banks Number of alternators

Dimensions

50 50 50 50

2 3 4 6 2 3 2

1 1 2 2 2 2 2

100 x 120 x 53 100 x 120 x 53 200 x 120 x 53 200 x 120 x 53 200 x 120 x 53 200 x 120 x 53 200 x 120 x 53

741002

100 100 150

VOLTAGE CONVERTERS

•

IP43 protection rating

• Designed to convert an input voltage of anywhere between 18V and 35V DC into a 12V DC output for use on most electrical items • Easy to install with no special tools required • Very efficient, running above 95% efficiency due to the use of active rectification

VC ORI241205200

Part no.

Volts

Watts

Max Amps

Length mm Width mm Height mm

VC ORI241205200 VC ORI241210200 VC ORI241215200 VC ORI241220200

24V - 12V 24V - 12V 24V - 12V 24V - 12V

60

7A

27 37 45 45

51 94 94 94

53 73 73 73

120 180 240

12A 20A 25A

VC ORI241210200

61

info@asap-supplies.com

www.asap-supplies.com

01502 716993