example

SAFETY KEYS

ENGINE KILL SWITCHES

• Emergency engine stop keys • Popularly used with outboard control boxes

Part no. 744300 744301 744303 744304 744305 744306 744307

Type

744323

744328

744324

With seven keys

Part no. 744323 744324 744328

Description

744300

For Tohatsu motors For OMC simple fork For OMC / Honda For Yamaha motors For Mercury / Mariner For Mariner / Suzuki

Chrome brass, pull for open circuit Chrome brass, pull to close circuit

With key, cable and hook. Pull to open or close circuit.

744329 Spare key and cable for Selva, Johnson, Evinrude and Honda

744303

ELECTRICAL

GAS ALARMS

A Pilot gas alarm is an important and cost effective item of safety equipment wherever gas or other dangerous vapours may be present in the environment. However good a gas or engine installation may be there can be occasions when either due to mechanical failure or human error, a potentially lethal leak may occur. Many of the vapours present on boats and in caravans such as butane, propane and petrol are heavier than air, meaning even a small leak can soon build up to dangerous proportions in the bilge of a boat or in an inadequately ventilated caravan. Pilot gas alarms are not fitted with an on / off switch as they are designed to be permanently on whenever the master switch is activated. The Pilot gas alarm also has a built in test feature to ensure the system works correctly. 12V 24V Description Cable length metres Detector heads Dimensions mm l x w x d 715511 Mini gas alarm 3.5 1 100 x 55 x 40 715512 Gas alarm 3.5 per head 2 115 x 70 x 40 715505 715505-24 Gas alarm shutdown solenoid 3.5 per head 2 120 x 65 x 35 715503 715503-24 Gas valve controller shutdown solenoid - - 100 x 53 x 35

715511

715503

715502-1

715502-2

715502-1 Replacement gas detector head for Pilot gas alarms

715502-2 Replacement pilot gas detector head and cable

• Three LED status indicators: unit has power, entered fault mode or alarm mode • Can be wall mounted, ceiling mounted or left free standing • Non-removable sealed battery pack with a 7 year life • Suitable for boats, caravans and domestic use • Operating temperature: -10°C to 40°C CARBON MONOXIDE ALARM

Part no. 715541

Height mm

Width mm

Depth mm

715541

72

112

35

WARNING BUZZERS A warning buzzer can be used in many applications to warn of a potential problem. A simple alarm system can be made from a switch and a buzzer such as those for low oil pressure, high water temperature, or a bilge float switch for high water level. Use in conjunction with a warning lamp to provide both visual and audible warning of potential hazards.

709303 Black warning buzzer suitable for use with Murphy switch gauges and TL7 warning lamps. The alarm sound of the buzzer can be set to pulse or a steady sound. This buzzer can be through panel mounted with panel thickness of 3mm with a cut out required of 29mm. Suitable for use with 12V or 24V systems. Low amperage, only 28 milliamps @ 24 Volts. WARNING BUZZER

Part no. 709312 709314

Volts

Type

Colour

709314

709303

12V 24V

Single urgent tone Black Single urgent tone Red

62

info@asap-supplies.com

www.asap-supplies.com

01502 716993