example

EXOWRAP - EXHAUST LAGGING

• ExoWrap is a revolutionary system made from biosoluble vitreous silicate fibre, reinforced with an outer jacket of heat sealed aluminium foil • Available in tape roll or blanket form • A quick and easy way to insulate high temperature surfaces in the engine room • Apply in one step therefore eliminating the time consuming job of putting on layers of insulation • ExoWrap is rated for use to 1,000°C maximum and can be used throughout the engine room

EXOWRAP TAPE BLANKET

EXOWRAP TAPE ROLL

EXHAUST

413886

413888

413882

413884

Part no.

Width mm

Length metres

Thickness mm

Securing silhesive tape

Part no.

Width mm

Length metres

Thickness mm

Securing silhesive tape

413886 413888

413889 413889

413882 413884

413889 413889

300 600

7.7 7.7

25 25

50

7.7 3.3

3

100

12

SILHESIVE TAPE

EXHAUST LAGGING • Glass webbing • Asbestos free lagging tape • For insulating dry exhaust pipes, exhaust manifolds and hot water pipes • Rated up to 550°C • Available in 10 and 30 metre coils

413889 Quietlife ExoWrap silhesive tape for securing ExoWrap lagging. This is not like ordinary tape, it needs to be worked in and moulded to get the ideal result. Width: 100mm Length: 15 metres

413801-10

413889

10 metres

30 metres

Width mm

Thickness mm

DRY EXHAUST PIPING Flexible exhaust piping for dry exhausts • Sold in 2 metre lengths • Designed to run inline as a flexible section in-between engine and rigid pipe • If bent to an extreme angle, this product may not be gas tight

413801-10 413803-10 413805-10 413807-10

413801-30 413803-30 413805-30 413807-30

40

3

25 diameter

413803-10

50 75

3 3

413810 Quietlife exhaust asbestos free lagging sheet with ‘o’ foil facing. Sheet size: 1m², sheet thickness: 1.7mm, rated up to 500°C.

413810

Part no. 417701 417702 417703 417704 417705 417707 417709 417711 417712 417713

I.D. mm (inches)

25 (1”)

28 (1-1/8”) 32 (1-1/4”) 35 (1-3/8”) 38 (1-1/2”) 45 (1-3/4”) 57 (2-1/4”) 60 (2-3/8”) 63 (2-1/2”) 51 (2”)

EXHAUST BELLOWS

Constructed from stainless steel 321 with steel end cuffs suitable for welding. The bellows fit between the engine and the pipe and absorbs engine vibrations as well as eliminating the expansion of exhaust pipes. Exhaust bellows are not suitable for absorbing engine movement when the engine is fitted on flexible engine mounts.

417701

RAIN CAPS

413911

These mild steel rain caps can be used to prevent rain water and other debris from entering a vertically mounted dry exhaust outlet. These rain caps clamp to the outside of the pipe spigot and have a hinged lid which will open to allow the exhaust gas out, but will close once the exhaust gas flow stops. Other sizes are available, please visit www.asap-supplies.com

Part no. Nominal bore mm (inch) Cuff I.D. mm Cuff O.D. mm Length mm 413903 25 (1”) 27 33.5 155 413905 32 (1-1/4”) 37 42 205 413907 38 (1-1/2”) 43 48 205 413909 51 (2”) 54 60 245 413911 63 (2-1/2”) 70 76 245 413913 76 (3”) 81 88 245 413917 102 (4”) 106.5 114.5 245 413921 127 (5”) 132 140 245 413925 152 (6”) 157 168 245

Part no. 417500 417501 417502 417503 417504

For pipe size mm (inch)

38 (1-1/2”)

51 (2”)

64 (2-1/2”)

76 (3”)

88 (3-1/2”)

417500

111

info@asap-supplies.com

www.asap-supplies.com

01502 716993